Oak Patch

Oak Patch, originally uploaded by escher1.

I noticed the oak leaves when I was going back down to the car after my run last Thursday on Clougha. The leaves had three colours - green, brown and yellow - many of them with those three colours present on the one leaf. I imagined making a leaf patch on the ground that wouls be a patchwork where the colours would join so there were pools of colour, not fading but each colour linking up with teh same colour on another leaf.

Today I collected some and noticed how the stalks on some were a different colour to the rest of the leaf, some brown ones had yellow stalks, some yellow ones had brown. This was the same with the veins. Some yellow ones had green veins and so on. I like the shape of oak leaves - they remind me of jigsaw puzzle pieces.

Whilst making the leaf fade on the tree branch I noticed the tree as it was framed by another two which would lend itself to containing a stick frame to go around a work. First I fiddled around making a frame wondering what to put inside it. First I thought of a line of sycamore leaves I had left over but then I settled on the oak leaves.

I really liked the mottled brown leaves with the yellow stems so I thought I would make the sculpture fade around this feature. The shape of the tree leant itself to this sort of design so I followed what seemed to go best.

I kept running out of thorns so I had to cannabilise them from the other work and to get the shape I wanted I kept having to peer at it from where I would take the picture. I am glad I did as the shape needed a lot of tweaking but I think in the end it is nicely balanced. I tried not to compromise (even though I was knackered and wanted to go home) but I perservered and collected the right leaves until I got the fade just how I wanted it. This also involved chopping the tops off the yellow ones in the centre as they had too much brown on them and it confused the look. I am pretty pleased with it however. I think it has turned out well.

Autumn Leaf Fade

autumn leaf fade, originally uploaded by escher1.

The autumn colours are turnign out to be really good this year. Apparently the exceptionally wet summer has meant the leaves are full of sugars which means more vibrant colours.
This tree is near to where I run on Clougha Pike and I have had my eye on its straight branch for a while. Earlier this week I experimented with a torn leaf line on a tree near to the flat but didn't finish it. I have been trying to pick the good places to make sculptures now as the resultant image is much improved if the situation is good. I collected some sycamore leaves and then drove over to Birk Bank.

The design is pretty straightforward with the centre section of each leaf cut out and pinned to the tree with thorns. Occasionally I had to reverse the direction of the leaf to keep the fade going the right way as it went from one colour to the next. The colours aren't the same all the way along as I tried to follow the fade of each leaf so at the strat there is less yelloe, more orange and dark red, whereas in the middle there is some brown and then more plae yellows. Doing this certainly gives you a deep feel for the multitude of colours that are present.

The picture is disappointing though. Maybe next time I will take a series of pictures and stitch them together.

autumn fade, originally uploaded by escher1.

Leaf Square

Leaf Square, originally uploaded by escher1.

Down the bottom of the cemetery there is a group of sycamores with quite striking leaves. The autumn leaf litter underneath them consists of hues from yellow through to brown. Each leaf seems to be only of one colour though and the shades are quite subtle, almost pastel. I love those leaves and thoughts of how to use them in a work buzzed around my head for a few weeks. I didn’t think it would be possible to make anything under those trees, even though I would have liked to, as there were too many graves and it just wasn’t private and I really didn’t want to upset anyone. Shame really as I much prefer to make the work at the location from where the materials are collected.

In the morning I collected a bag full of leaves with the intention of taking them down to the woods by the Crook ‘o’ Lune and making something there. In my mind I imagined making a square of yellow leaves surrounded by brown leaves where the join between the two would be created by tearing along the middle of a brown leaf that is same shape as the yellow one to create the effect that the colour change is within a single leaf. I liked the idea of a square because I thought it might look like a window, a view, if you like, into another world. I wanted to achieve that otherworldly feel so inherent in Goldsworthy’s work.

I had looked at AG’s circular leaf works and I didn’t want to copy them exactly, another reason to try a different shape, but I couldn’t quite imagine how this would work in the corners. I thought that that might mess up the whole look but I persevered nonetheless.

First I pinned yellow leaves into the centre with thorns after clearing a patch of earth in the forest. I then attempted to start to create an edge. What at first seemed quite simple appeared to be problematic. Finding two leaves one brown, one yellow of the same size seemed to take ages. This is going to take a long time I think! But I persevered and this process became easier as I started to tune into the size and shapes of the leaves.

The first corner did prove a problem. It had to overlap it in a way that meant the continuous yellow/brown leaf effect was destroyed. But I don’t think it is too obvious in the final picture. Perhaps next time I will create a corner in the brown leaf on top rather than tearing it right through, maybe that will work.
Soon I ran out of thorns and had to go off to collect some more, none of the trees nearby were any good but I found some in the field next door. I grabbed some whole dead branches and carried them back to the leaf patch.

The right size and shape leaves were coming more easily to hand now and it didn’t take long to finish off the square. Now I need to complete the brown frame. Lots more pinning down required. At first I tried to make the leaves look like they had fallen there naturally but this didn’t really look right so I altered the orientation of the leaves to make them point outwards around the frame. This looked more balanced.

I set the camera up and looked at it through the viewfinder and took some test shots. This immediately showed me that one of the leaves in the frame was too light and stuck out like a sore thumb so I changed it.

I created a shadow with my body and the cushion I had been sitting on so that the light across the work was uniform and took some shots. Like this it looked a bit too artificial and wasn’t quite creating the effect that I desired. My original idea was to create a leaf patch that was hidden amongst the leaf litter so that it looked like it was part of the natural landscape yet alien to it as well.

I used some of the left over leaves to surround the square and make it look like it was amongst the leaf litter. Now this was more like it! This was just what I was trying to achieve! I became quite excited about the work, it seemed to come alive. The photo probably does not do it justice but the affect in person was quite stunning.

Probably my best work to date. I couldn’t wait to get home and load up the pictures!

Leaf Square 2, originally uploaded by escher1.

Leaf Spiral

Leaf Spiral, originally uploaded by escher1.

Since I started to look for sweet chestnut trees I have found quite a few. There are three in the cemetery, one of which is very small and consequently produces larger leaves, and ones of good quality. Also we chanced upon one in the park that had dropped some remarkably large leaves. I collected a bag full with the plan of making a spiral this time. It seems that it would benefit from being pinned with thorns more thoroughly so that it would retain its structure better, so I collected lots of long thorns too.

The practice of making the first two horns meant that starting off the spiral was straightforward and I quickly made progress. I joined each leaf to the next with grass stalks and pinned the leaves together with thorns trying to make the structure spiral round as quickly and as sharply as possible. As the leaves spiralled around I just laid each leaf on top of the next without constricting the previous one so that the hollow tube was getting larger and larger far too quickly to my eye, as after I had completed 360 degrees the tube seemed to be very wide and a couple of leaves were required to make one revolution. This would mean that it would take a lot of leaves and a long time to make a decent number of turns in the spiral.

So the next day after work I carried on with the construction by firstly unravelling 50% of what I had already done and reassembling it so that each leaf was tighter to the previous one so the width would increase more slowly. This meant that the spiral was longer and thinner but the leaves had dried out somewhat and were more crispy meaning that the holes made by the thorns would be too big and unsightly.

As the spiral grew it became more unwieldy and difficult to work with. It was important to keep the structure tight so that the spiral continued around itself with no gaps, which meant I had to pay close attention to how I was building each segment. Not as easy as one might first think it would be.

The next day I got home from work and found that it had fallen off the top shelf of the bookcase and was a bit squashed. Again the last section of the spiral had become too large so I again unravelled it so that I could tighten the coils more. This seemed to be easier after making it once – i.e. to construct the turns too large, then deconstruct it and make the turns tighter. In hindsight this was a mistake and I wished that I hadn’t unravelled it. It is much easier to make each new leaf how you want it and to pin it in the right place. It is much less easy to handle many coils and pin them just where you want. This resulted in it becoming misshapen and lumpy and the dried out leaves became too brittle and the coils kept coming undone and I created far too many holes with the thorns.

Next time I will try and build it all in one go, from scratch, making sure that I was happy with each coil before I moved onto the next and make efforts to ensure that it doesn’t expand too quickly. Patience and attention to detail being key and I will also try and achieve that organic shape and quality where each segment is laid at the same angle as the next so it looks like a naturally formed crustacean.

On Saturday the sun was shining so I took the spiral out to look for somewhere to photograph it. I got a very strange look from a passing teenager who looked very curious as to what I was carrying, I don’t supposed he had ever seen anything like it. I headed for the chestnut tree by the entrance to Standen Park, perhaps I would place in on the fallen leaves for a photo. I tried this but it didn’t quite look right. What I was really after was a branch to sit it on and just above there was a perfect hollow on a branch to sit it on and the late afternoon autumn sunshine dappled across it was just what I was looking for. I like the comment I got on Flickr “a cocoon left by a giant but benevolent creature”! Quite amusing really, but I was trying to achieve that organic strangeness inherent in Andy Goldsworthy’s work. Of course this is a copy but efforts made in the setting and lighting for a photograph of a work really pays dividends. I am coming to appreciate more and more AG’s skill with the materials, setting, with light and with the photograph to achieve much more than the sum of their parts.

Leaf Spiral, originally uploaded by escher1.

Second Leaf Box

Leaf box 2, originally uploaded by escher1.

With all I had learnt from constructing the first leaf box I decided, the next day, to make another one.

This time I realised it was important to only use leaves that had a solid right angle in the veins and not to use leaves that didn't. I had used leaves that weren't fully 90 degrees in the first box and it had skewed the shape quite considerably.

Whilst hunting for suitable leaves in the cemetery I discovered that certain trees had many leaves that were right angled or a little more whereas others had none, all were less that 90 degrees. I found the right trees last and I was getting little worried that I wouldn't find any suitable ones as I examined leaves from several trees before I found some good ones.

Eventually I had found enough and collected a load of thorns and began. I concentrated on ensuring the shpae was as good as I could get it and that the sides were of even lengths. As I came to finish it one of the side joins had split but I found thos useful as I could get my fingers inside to place the last few thorns and one finished the gap was held closed and was invisible.

I am really pleased with the final result and the box has a real tactile quality, the leaves feel soft and box has a kind of spring. I guess it will dry out over time and go much browner and drier.

I had a lot of difficulty getting a decent picture of the first box. I couldn't find anywhere outside to take a decent picture and with the stems stuill attached to the leaves it just wouldn't sit properly anywhere. So with this box I decided to take a picture indoors using natural light and a reflector to help the contrast. I tried in on a black background but white seemed to be better.

I am making quite a collection on leafworks now - two horns and two boxes to go with the stick balls.

First Leaf Box

Leaf box 1, originally uploaded by escher1.

I studied how Goldsworthy had made his leaf box and discovered that the sycamore leaves have right angled veins on them. This was the secret to amkeing the leaf boxes cubic shape.

I gathered a pile of leaves and began to construct the first square that wouldl make the base. I used dried grass stalks to pin it together but this didn't seem to work so well so I wenty to collect some thorns. These worked much better as the sharp point allowed me to pin the leaves together much more successfully.

As I neared the end of the box any inconsitencies in shape became immediately apparent and exaggerated as the form had to be pulled together. It seemed it was important to construct the box carefully right from the beginning.

Not really happy with the final result but a useful exercise in discovering how to construct a box and what I must do now to make a better one.

Fading autumn leaves

fading autumn leaves, originally uploaded by escher1.

We went for a walk to look at all the trees around the area again, first to the leisure park, then to the park. The park was full of screaming kids and miserable looking parents so we headed for the cemetry for some solitude. A foghorn of woman walked past several times yakking, very loudly, on her mobile phone. So much for solitude but it was still better than the park. I was devoid of inspiration, I wanted to do something with the yellow and green lime leaves but it just wasn't working. The cherry tree colours were just too hard to ignore so I started to make something with them.

Most of the leaves had turned now and they were dropping off the tree with every gust of wind. The orange, pink and red hues were just wonderful though. And it didn't take too long to create one square, although I rebuilt it several times - being careful to keep the spines straight. It just didn't look like enough on it's own so I decided to copy it but make the colours reverse. First I tried a frame but that didn't work so I settled on making another the same size. An 8bit Jpeg though just doesn't do the colours justice.

Leaf Curtain

Leaf-Curtain-Framed, originally uploaded by escher1.

The beech tree at the end of the road had three distint colours - yellow, orange/brown and green and I had been considering what to make with them for a while. An idea about placing them in a split stick and staking them into the ground and some other ideas but today the sign is out so I must make something where I can photograph the sun shining through it.

Using dried grass stalks I pinned together a frame of green leaves then filled in the frame with brown, orange then finally yellow leaves. Next time I will try and build it from the inside out as it became quite difficult to pin the last few leaves in middle. Quite a few of the leaves tore and needed repinning but it made it easier to pin them under a vein. Now finished I needed to find a place to pin it up so the sun would shine through it. This proved to be quite difficult!

We went to the cemetry to harvest some thorns to pin it up with, while I carried it around carefully in a folded up sheet, but horizontal branches or frames to pin it to proved elusive. We walked around 90% of the park before finding somewhere right next to the three cherry trees with wonderfully coloured leaves.

The light breeze was a real pain and I had to wait for ages while it stopped and the curtain hung undisturbed. Something was missing though and another yellow leaf needed pinning to the middle. I went searching for a yellow beech leaf and found one nearby, although the tree seemed to be a different beech variety.

Once I had pictures in the can (or on the card) there we went back to where the work was originally made and ironically, there was now a frame in a tree that I could pin it to. It didn't turn out as neat as I wanted but it did look quite good with the sun shining through it. I was surprised to still see it there pinned to the tree on Sunday but by Monday it had gone.

Other-side-of-the-curtain, originally uploaded by escher1.

Leaf-Curtain, originally uploaded by escher1.

Leaf horn in leaves

Leaf horn in leaves, originally uploaded by escher1.

I studied just how Andy Goldsworthy makes his leaf horns and discovered some tricks. It is a continuous spiral with each leaf pinned to the next, with the thickest leaf spine being joined to the thinnest of the next so each leaf is reversed in orientation to the previous one. We also went lookign for sweet chestnut trees and found a nice one by the Lune whuch had produced some nice supple leaves which has made this horm look a lot neater. I think Andy uses a lot more bits of grass to pin his horns so that they are quite fixed in shape whereas mine concertinered in and out quite a lot so took quite a bit of positioning to get to sit straight. I really wanted to get the tail to sit right over the top but it just wouldn't stay there. So the next one I make I will pin a bit more thoroughly. It defintely pays to try and keep the divisions the same size as it looks neater and I have discovered that a certain type of dried grass is best as it is thinner and hence sharper and penetrates the leaf better. Also the leaves dry out quite quickly and it is better to make the horn the same day as you collect the leaves.

This picture was taken in bright sunshine in horse chestnut leaves which produce a rich colured background. The grass gave better contrast but I struggled to get the horn to look shapely enough. Several lessons learnt but I am very pleased with the result.

Leaf horn on grass, originally uploaded by escher1.

Leaf Horn

Leaf Horn, originally uploaded by escher1.

My first attempt at making a Goldsworthy leaf horn. I wanted to make more but ran out of leaves and the ones I did have were not very good quality. I hope the results will be better with better leaves.

I had to study the Rivers and Tides DVD to see how Andy puts together his creations, and after first trying to pin together rings of leaves in concentric circles I saw that AG's method of spiralling round each leaf whilst inserting the next leaf within the last one and pinning it to it, then continuing the spiral was a much more successful method.

We will try and find a stash of sweet chestnut leaves so that I can make something much larger. Dried grass stalks definitely worked very well for the pins too.

There is something very tactile about these constuctions. The crispness of the leaves and organic shape make me want to pick it up and examine it.

Leaf Fade

Leaf-Fade-2, originally uploaded by escher1.

We went to the Yorkshire Sculpture Park yesterday to see the Andy Goldsworthy exhibition. Of course his stuff was good but a couple of pieces were really striking. The large log cone and the slabs with holes in were pretty impressive, but the last two pieces in the first exhibition hall were more so. The dark room which turned out to be inside a round log and stick structure, complete with musty smell was a surprise and it was interesting to see the internal structure was very similar to how I built mine; more rounded at the bottom but with longer struts as it started to close in at the top. But the piece de resistance was the chestnut stalk curtain. It had a really unearthly feel and a strong power over my psyche. The thorns used to hold the stalks together were quite long (a couple of inches) and it gave it a much more three dimensional aspect that I wasn't expecting. But it also seemed to be moving, gently undulating in and out but with no individual part actually visibly moving, so its overall affect was quite organic, powerful and unexpected too.

Dotted around the park were dozens and dozens of spectacular trees many displaying the rich colours of autumn with every shade you could possibly expect on display. I wanted to get cracking with a coloured leaf design there and then but it wasn't really possible to sit down for several hours to make something as we had company. But it inspired me to make something soon.

Around Lancaster I had been keeping my eye out for the changing leaves but really hadn't seen much that would be of any great use. The horse chestnut trees had gone yellow and orange but the leaves looked unusable as they had shrivelled up. The rowan leaves up on Clougha had gone straight from green to dried up brown, almost diseased looking, very disappointing. Maybe the climate on the other side of the Pennines means autumn comes earlier over there and the milder climate in Lancashire means the colours are yet to come? But I am not sure as many leaves seen to have just dried out completely with no colour except to brown. Most puzzling.

So we went out around the park to see what we could find, and disappointingly my fears seemed to be played out and out of all the varieties on show one solitary copper beech was displaying enough different shades, they are very beautiful though and deserves some attention. Shame it is right in the middle of the park. Julia suggested we try the cemetery as we have had luck there before. I wasn't hopeful.

Three quarters of the way around the park we finally see some amazing colour. Next to each other there are two trees, I am not sure of the variety, perhaps cherry trees that are displaying a huge range of colours. On first inspection I can see yellows, oranges, reds and greens so we grab some leaves and go back to the flat for a while so I can figure out the potential.

I identified maybe five different hues and planned out what I was going to do and walked back to the cemetry to begin. Apart from the colour fade I wanted the leaves to be overlapping and for central veins to be horizontal so that the structure would seem symmetrical and would flow. It started to come together quite well and quickly I could see the potential and also the number of colours actually available proved to be a lot more than I first thought. All shades from purple to red to orange, pale yellow and green were evident. I was amazed by the number of hues. And very pleased with the final result.

Leaf-Fade, originally uploaded by escher1.

Berry Fade

Berry-fade, originally uploaded by escher1.

My mind had been distracted from land art for quite a while so I had failed to notice the rowan berries that had suddenly sprouted on the trees. Once I had noticed I could see that they were everywhere and had a large variation in colour.

I pickeds some in Birk Bank car park and we walked along to the quarry to make something. None of the rock slabs seemed flat enough and I knew I would struggle to make anything unless the surface was perfectly flat. And I was right!

The gritstone surface undulated quite a lot and the little berries just kept rolling around. Each berry was not uniform in colour, so to get the fade affect I needed to position each one esactly one way up. How very difficult was this to do?! Extremely!

Over and over again they rolled messing up the design, so I eventually had to balance each row against the next one. One wrong touch in the wrong place would result in them all falling out of line and having to start again. Very frustrating!

After a very long time I was nearly there, only for the square to look a bit misshapen from some angles. So I spent another painful half an hour trying to reconstruct the corners. I couldn't quite get it as square as I wanted but I just couldn't take it anymore, so left it as it is. NOt bad but not totally how I wanted it to look, but I am not sure whether I could ever make it like that!

Bracken Fade

bracken fade, originally uploaded by escher1.

It has been quite a while since I made have anything but I have picked out changes in the environment, in the plants and of the landscape as the wet summer has progressed. Flowers have grown, grasses have become tall and many things have changed colour. The bracken near Birk Bank is now thick but in places where the heather has been burnt back they are shorter and dotted here and there are plants stifled of a drink with hues or burnt umber, orange yellow and pale green that are just crying out for a fade design. First of all I was going to use a whole branch for each colour and create something larger, but the wind was strong and I couldn't find anywhere large and flat enough to do this. I then tried to create a swirling design over a rock hole but it looked too untidy. Finally I settled on this two fronds of the same colour opposing. As I am a little out of practice my attention to detail is lacking and the result looks a little out of balance to me. The fade from yellow to green is too sharp, but as a first try it isn't bad. One thing I had noticed about note doing some land art for a while was the things I had missed as I had not immersed myself fully in the environment as you must do when trying to create something of merit, and so I had missed the sprouting of rowan berries all over, they are thousands of them and intriguingly their colours range from a pale yellow right through to deep red and are just crying out for something to be made from them.

Stick Balls

Polarised Stick Balls, originally uploaded by escher1.

I finally made the third stick ball on Saturday and so I could finally make the sculpture that I have had sketched in my notebook for ages. I went and found some suitable straight sticks in the waste ground and headed off to Littledale in the glorious sunshine. I thought that the flat area on top of the gritstone outcrop would be perfect and the views of the Lakes was magnificent. There was a bit of a breeze but they stayed stood up and gently wobbled in the wind. My original plan was to put sticks coming out of the tops too to make them look speared but they looked quite good with just the balls on top so I took quite a few pictures like that until I tried the speared design. I though this looked even better. This is the first sculpture where I have made an effort to build it in a specific location, definitely something I shall pursue more in the future.

Speared Stick Balls, originally uploaded by escher1.

Faded Cairn

Faded Cairn, originally uploaded by escher1.

After buidling the pebble fade yesterday I was keen to go back and build another cairn now I had learnt about the colours on the beach. Next morning the weather was fine so I headed down to Heysham. Purple round rocks were easy tyo some by and I ignored the strange looks I got on the beach to get on with the construction. It didn't take too long to build (a few hours) but still longer than I expected to complete the top. It might look like an easy thing to make but unless extreme care is taken it is unstable and falls down again and again. The top section is very frustrating and falls down again and again which sees my scurrying off for more small, dark rocks. It is finally finished but this only leads me to absorb more of its imperfections. Not wantign to dismatle it completely I have to ignore the sections that are mis coloured and out of place. I can only see where it is wrong and not what is right. These sculptures can be ever so frustrating of some details don't fit with the rest. Still from some angles it looks good and I can maximize its potential with the camera. This land art work is tough!

Cairn on Heysham Beach, originally uploaded by escher1.

Fissure

Fissure, originally uploaded by escher1.

After going to Heysham this morning to do the pebble fade on the driftywood beam my brain was buzzing with ideas of more creations. It was very windy outside so I couldn't do the piece with the horsechestnut leaves I had been planning or the sculpture with the new stick ball I made today. Those will have to wait for a clamer day. After the FA cup final I knew the tide would be going out again so I headed down to Cockerham Sands, I hadn't been there for ages. Pleanty of scope for things there, lots of different coloured pebbles but missing the purple, pink and orange ones across the estuary in Heysham. I wanted to build a cairn of the faded colours I did this morning but I am not sure that would be possible so instead I though I would have a go at anotehr Andy Goldsworthy split pebble sculpture, this time trying to make it look like there is a fissure in the beach. Very pernickety these split pebble sculptures, keeping the crack there is very hard. I needed to use more pebbles of different sizes to make it look more realistic but I am please with the affect nonetheless. I am still a way off achieving AG's perfection but that is as it should be, he is the master and I am only a follower.

Scratched Pebble Sculpture

Scratched Pebble Sculpture, originally uploaded by escher1.

I quickly knocked this up after doing the pebble fade.

Pebble Fade

Pebble Fade, originally uploaded by escher1.

There are some fantastic coloured pebbles on the beach at Heysham. The cliffs are made of sandstone, silk stone and gritstone and yield many hues of white, yellow ornage, through to pink, red and purple. There are also black , grey and white rocks of limestone, volcanics and shale. This beam had been washed up on the beach here and served as a perfect frame for the line. It isn't until you collect pebbles for a piece like this that you can see quite how many different colours there are. I got the fade goping pretty quickly but hadn't made it long enough to make go all the way along the beam so I had to re do it a few times, the colours were really nice though and I think it turned out well. Not so easy to see in the photo but more impressive in real life.

Pebble Fade 2, originally uploaded by escher1.

Another Goldsworthy Spiral

Goldsworthy Spiral, originally uploaded by escher1.

My arms were far to achy for any climbing so we headed down to Heysham instead. The tide was just going out, the wind barely noticeable and it was quite warm. Not quite the total washout that was predicted. We had a look around the corner ontowards Morecambe with the graveyard and the ruined chapel on the cliff but made a uturn and headed to our usual spot.

My first thought was to make a long pebble line of faded colours so I began searching for the contrasting colours I would use as a guide, but the idea didn't grab me so I gave up on that one. I had finally brought down all the split pebbles collected from Lytham so I thought it was time for another attempt for a spiral. I sat up on one of the sandstone slabs and bashed the final unsplit pebbles until I had quite a large collection of them. I selected a piece of sand on which to start building and transported a few of the pebbles down onto the beach (why I didn't unload them all down their in the first place I don't know)! After placing three of the split pebbles a few sppits and spots of rain came down. I stuffed my waterproofs under a slab in anticipation of making a rain shadow. The rain suddenly increased in heaviness so I dashed over to the slab, there was no time to put on my waterproofs and laid down. I had to keep my mouth and eyes shut to keep the water out and I was desperate to know whether the rain shadow was appearing and for there to be a break in the rain so I could go and get my camera. Julia brought it over and said that she didn't think the rain shadow was working. It was raining very heavily now and I was soaked through to the skin and quite cold. I got up to examine the slab and indeed she was right, it looked just as wet underneath me as it did either side! Hmmm it seems that a light shower would be much better and the slab needs to be flat, Julia's idea of the lying on the sand wouldv'e been much better, the rain had created an interesting texture on the sand's surface.

After the soaking I went back to the sculpture. I didn't think it would be quite to make as it was. The wet sand now stuck to everything requiring much blowing and sweeping and the lining up of the crack around the spiral took hours and hours. Each time I would move one part another part would move out of alignment. Selection of pebbles was important, ones with a vertical split down the middle worked best and balancing them over each others edges worked well too. The finishing touches took ages too, standing over and squinting at the crack to ensure it flowed and there weren't too many kinks in it, it might have appeared like I have OCD as I fiddled with the smallest little detail but it is all important for the final image. Just wish I had spent the time scratching the pebbles white!

Balls and Slabs Balance

Balance, originally uploaded by escher1.

We needed to get out of the house for a bit as we were going a bit stir crazy, Julia felt a bit ill and I felt tired and listless. My first few balances just didn't seem to work and I felt particularly uninspired so I thought I would try at another slanting balance. Decent slabs were few and far between and it took some time to find enough. This time I really wanted to concentrate on getting the structure looking symmetrical and balanced. It suffered a collapse half way through so I begun again but there was no way to prevent it from being precarious and carefully balanced, the breeze wasn't helping. But then they don't have to stand up for very long when you can freeze it in time by taking a photo. I think it turned out especially well and is my best of this design to date.

Stick Crack

Stick-crack, originally uploaded by escher1.

I looked round for another slab that framed the mud covered stick better. This one fitted almost exactly with no altering of the stick required and if I stood right over it parts of it reached the edge. I didn't see it when I was there but in the resultant phot it almost looks like a crack in the rock, not intentional but quite interesting.

Half Black Stick

Half-black-stick, originally uploaded by escher1.

I had seen this stick in Brik Bank Quarry on Saturday when we were climbing there. MY first thought was to cover it in green leaves so that it contrasted with the gritstone slab at the base of the climbs. But after experimenting with that at home I decided the leaves were now not young enough to give a strong enough green. So I used more of the peat to cover the stick. The earth was easier to work when it was really wet and it didn't take too long to cover it. I liked the contrast when it was half covered so I took pictures of both half covered and fully covered. I tried to get it in exactly the same place on the slab but didn't quite succeed and the shape of the stick wasn't quite right as it didn't fill the frame well enough.

Peat Cracks

Peat-Cracks, originally uploaded by escher1.

After finishing the rock stacks I wandered into the woods trying to think of something else to do. Underneath the leaf litter where I had removed a slab the earth was very dark, if not black. I dug some up and then used it to fill in the cracks on this boulder. I am not sure whether the affect works or not. Andy Goldsworthy obviously puts a lot of effort into selecting a suitable boulder where the effect will be maximised.

Arch Stack

Arch Stack, originally uploaded by escher1.

I was imagining a stack where in the middle there would be a circle, an upside dowb arch with a another arch on top but this changed to making an ordinary arch. I needed two rocks with sloping edges to hold the arch. The first one came easily but it took ages to find a second one. But once I had done I liberated flat slabs from the earlier stack, found some more and constrcuted the arch. It took 3 attempts to hold them altogether and slot them into place. I didn't use anything underneath to hold them, I just slotted them straight in the shuffled them around a little to make the arch more pronounced. It worked quite well. I was in a quandry as to what to do next. My first idea was to place a large curved branch through the middle to create a wooden arch and then build slabs around the ends to give the affect that the wood was growing out of the stone. I searched for a suitable branch but nothing was quite right so instead I continued the stack. The rest of the stack was quite precarious and one of the big slabs on the end fell over and I can't believe the arch survived. The connecting stone in the middle was only just standing up and each stone added on top made the arch creak a little more each time. Wisely I thought I had better get a photo at this point as I thought it was coming down soon. I wanted to put a large pinnacle on top and as I was doing so it did fall down so I am glad I got this picture before I tried that.

Slanting Stack

Slanting-Stack, originally uploaded by escher1.

Following on from the other slanting stack I wanted to do one which slanted one for multiple layers then the other way. It took quite a while to find enough flat slabs and some of them were very heavy and required lugging out of the nearby wood. Most of these got discarded as the were too big and made it look out of balance. So I settled on the smaller slabs and positioning them three one way then three the other and so on. The effect gets a bit lost near to the top. I managed to fire off three shots before it fell down! It was another windy day.

Sandstone Fragments Sculpture

Sandstone Fragments Sculpture, originally uploaded by escher1.

This was the piece I started off doing when we arrived at Heysham beach but didn't complete until we were going home. I wanted to try smashing a piece of sandstone and reassemble with a hole in the middle but I couldn't get them to break how I wanted. So I thought about trying this crazy paving style sculpture and I pleased with how it ended up. I had to wait to finish it late because of the three bickering geology students hogging the cliff and I managed to get it done before the annoying family who started a bonfire turned up! The beach is definitely better on rainy, cold days!

Sandstone Fragments Sculpture, originally uploaded by escher1.

Volcano

Volcano, originally uploaded by escher1.

A bit of an unsuccesful attempt at a round sand castle of different colours. Didn't turn how I wanted it at all. Shame 'cos the red stone to make the top to ages to grind! There must be some mileage in the dry sand, wet sand grey/black sand contrast but I found it difficult to work with. Uniform colours look much better but are very hard to do.

Remade from the Purple Cairn

Remade from the purple cairn, originally uploaded by escher1.

This is what I made from the remains of the purple cairn. It might look simple but it took loads of fiddling about to get the balance of it right - moving stones around, discarding others and redoing it again and again. Worked out pretty well in the end and the trenches I'd dug much earlier framed it nicely in the photo.

Remains of the Purple Cairn

rermains of the purple cairn, originally uploaded by escher1.

I was interested to see whether or not the purple cairn I made at Heysham Head last week would still be there when we returned. The tide was high and just starting to go out as we arrived but as we traversed the cliffs at the top I could see this pile of purple rocks where the cairn had been. What remained I think it actually looked quite pleasing!

Wood Antlers

wood-antlers, originally uploaded by JRT Pickle.

Lots of wood lying about, decide to make an arrangement in a natural wooden vase, a hollow tree stump.

A lot of the leaves were not fully out on the trees, it sort of enhanced the woodiness of it all.

Bracken Struts

Bracken Struts, originally uploaded by escher1.

There were some great root systems and dead branches in the forest next to Coniston water and my eye was caught by this dead branch covered in moss. There was quite a lot of dead bracken nearby and that seemed perfect for this design. Shame about the ticks in the undergrowth! Anyway this didn't take too long to do and I think it worked out pretty well.

Bracken Struts, originally uploaded by escher1.

Moss & Bark Hole

Moss & Bark Hole, originally uploaded by escher1.

I found a fantastic bit of bark about 12 inches square and desperately wanted to do something with it. It had a hole in the middle so I has in mind a goldsworthy type hole. I found this stone cairn with moss growing all over it and thought it would be perfect to put the bark in to create and eye or a hole. I then got some moss and covered over the bark to try and disguise it and put moss covered rocks along the bottom to finish it off.

Fins

Fins, originally uploaded by escher1.

I wanted to place rocks like this all the way down the trunk alternating between dark and light but I just couldn't find enough flattish ones that didn't have ant's nests beneath them.

Leaf Horn

Leaf Horn, originally uploaded by escher1.

My first attempt at pinning leaves with thorns. I want to be able to build a spiral in this style so this was an experiment to see how it is done. It is actually reasonably difficult and you need good long thorns and need to be careful how you score and fold the leaves. A good hard bit of flat ground underneath is necessary too as the thorns don't stay in otherwise.

Purple Cairn

Purple-cairn, originally uploaded by escher1.

Back to Heysham Head again today. Some of my previous day's scuplture was still there - the sticks had gone but the frame, although partly buried, remained. I had decided to build a cairn of fading colours and decreasing sized pebbles. It took a surprising amount of effort and also nearly took the longest time of anything I have made. To find enough of the same colour and size for each layer took ages, but was good exercise! I noticed that there were some rocks with a split colour between red/pink purple and yellow/white so I intended to fade from deep purple at the bottom to red and pink then use the split pebbles to fade into white. This took a lot of fiddling about, disassembling, reassembling, selection of different rocks and the discarding of many. I also worked hard on the shape of it to get it to look well formed and symmetrical. Once I had the split colour pebbles in place I then worked on the forming the top. This was even more difficult as the little pebbles just kept falling off again and again. More working on the shape and finally it was finished. I was 75% happy with it. It looked good from only one angle and didn't look right in the others. The split colour pebbles just didn't look quite right and in hindsight a straight demarcation between purple and white would have looked better, or indeed different coloured rocks with more colour changes. Unfortunately the most photogenic angle had the power station behind and the best angle was low down so it looms behind in the finished photo. It was a dull day so the colours do not come out well in the photo, I am quite disappointed with the result. The cairn did look good from a distance though and the fade looked quite striking. Next time I might try two or three cairns of the same colour. Maybe purple, a red one and pink one. I will definitely try another design again.

Centre of the Circle

Centre of the Circle, originally uploaded by escher1.

Done quickly out in the wood behind the flat when I was bored. It was quite large - probably 10 foot across - finished with one of my stick balls in the middle.

Slanting balance

Slanting balance, originally uploaded by escher1.

I wanted to start building balances that have a more aesthetic look more like Andy Goldsworthy's creations. After I had finished the tree in a frame I had a little time to give it a go. There are nice flat blocks at Heysham and nice round gritstone pebbles too. This one went up reasonably easily with onluy a couple of disconcerting wobbles. The green white brown contrast behind was not planned but works well in the picture. I need to pay more attention to where things go to get the best picture. I did build it higher later on but I don't think it looked as good.

A little higher, originally uploaded by escher1.